Digital Indicator ID-H, CEE AC-Adapter 30,4mm, 0,0005mm
Digital Indicator ID-H, CEE AC-Adapter 30,4mm, 0,0005mm
Model: 543-561D
Brand: mitutoyo
Origin: Japan
概括
This is a superior multi-function indicator that gives you high accuracy and high resolution of 0.0005mm.
The Digimatic Indicator ID-H offers you the following benefits:
- 2-colour LCD backlight (green and red) provides you with visual GO/±NG
tolerance judgement and analogue bar-graph display. - You can display the maximum, minimum or range (runout value).
- Lifting mechanism over 30mm with cable release (optional).
- You can carry out zero-setting and presetting with the optional remote
controller, without having to touch the indicator. - The remote control system can be implemented in advance with the built-in RS-232 interface and a PC.
- External power supply via AC-Adapter.
- DATA/HOLD: yes
- Digital/Analog: Digital
- Inch-Metric: Metric
- Range: 30,4 mm
- Digital step: 0,0005/0,001 mm
- H MPE (Hysteresis): 0,0015 mm
- R MPE (Repeatability): 0,001 mm
- Digimatic data output: yes
- Measuring force: ≤2 N
- Protection: IP30
- Display: LCD, character height: 9.5 mm
- Max. response speed: 1000 mm/s
- Alarm: Counting value composition error, overflow error, tolerance setting error
- Stem Ø: 8 mm
- Contact point: Carbide ball, thread M 2.5 x 0.45 mm
- Power supply: AC adapter 6 V DC, 2A
- Delivered: Including AC-Adapter, spindle lifting handle
- ON/OFF: yes
- MAX/MIN/RANGE: yes
- RS-232C Output/Input: Yes
- RS-232C Input*: Yes
- ZERO SET: Yes
- PRESET: yes
- Function lock: yes
- GO/±NG judgement: yes
- Counting direction switchable: yes
应用
规格
- DATA/HOLD: yes
- Digital/Analog: Digital
- Inch-Metric: Metric
- Range: 30,4 mm
- Digital step: 0,0005/0,001 mm
- H MPE (Hysteresis): 0,0015 mm
- R MPE (Repeatability): 0,001 mm
- Digimatic data output: yes
- Measuring force: ≤2 N
- Protection: IP30
- Display: LCD, character height: 9.5 mm
- Max. response speed: 1000 mm/s
- Alarm: Counting value composition error, overflow error, tolerance setting error
- Stem Ø: 8 mm
- Contact point: Carbide ball, thread M 2.5 x 0.45 mm
- Power supply: AC adapter 6 V DC, 2A
- Delivered: Including AC-Adapter, spindle lifting handle
- ON/OFF: yes
- MAX/MIN/RANGE: yes
- RS-232C Output/Input: Yes
- RS-232C Input*: Yes
- ZERO SET: Yes
- PRESET: yes
- Function lock: yes
- GO/±NG judgement: yes
- Counting direction switchable: yes
Catalogue