ABERLINK Coordinate Measuring Machine Horizon 1000 CMM
ABERLINK Coordinate Measuring Machine Horizon 1000 CMM
Model: Horizon 1000 CMM
Brand: Aberlink
Origin: UK
概要
Extending The Linear Drive Horizon
Drawing upon the tremendous success of the Horizon 800, the Horizon 1000 has a larger X-Y-Z axis travel whilst utilising the same frictionless linear drives.
The entire design of the Horizon 1000 has been optimised to take full advantage of parts already used on the Horizon 800 whilst improving the stiffness-to-weight ratio across the bridge assembly. Most notably: The Y-axis rail is 200mm taller so that the same right-hand-side linear drive system is common and improves rigidity; the carriage assembly has reduced in size and weight, without compromising metrology performance, to improve the stiffess-to-weight ratio; the Z-axis motor has increased power to optimise its performance; the left-hand-side air bearing assembly has a custom extruded profile to keep weight to an absolute minimum and maintain stiffness.
High-performance, High-accuracy
The Horizon 1000 is a standout coordinate measuring machine with fast, smooth, and silent motion that is ideally suited to contact scanning. It also has a first-term accuracy specification of under two microns.
Unrivalled Reliability
Linear motors are non-contact and therefore have no wearing parts, thus provide the perfect solution for CMM drives, improving reliability and reducing maintenance.
- Linear motors offer frictionless, smooth, silent motion
- Thermal isolation of motors from metrology structure
- Smooth motion ideal for contact scanning
- Aberlink's revolutionary easy-to-use measurement software
- Shortest learning curve of any equivalent system - 1 day without prior CMM experience
- Choice of Y axis sizes ranging from 1200mm to 2000mm
- Suitable for the workshop environment
- Industrial joystick supplied as standard
- Free stylus change rack with every motorised probe head upgrade
| Axis Travel (mm) | X 1000 Y 1200, 2000 Z 800 |
| Overall Size (mm) | X 1603 Y 1830, 2630 Z 3070 |
| Motion | CNC |
| Structure | Bridge |
| Suitable for | Inspection Room |
| Drive Type | Linear |
| *Volumetric Accuracy | TP20 (1.9 + L/250)µm TP200 (1.8 + L/250)µm SP25M (1.75 + L/250)µm |
| Scale Resolution | 0.1µm |
| **Optimum Temp Range | 18 - 22°C |
| Operational Temp Range | 5 - 45°C |
| Table Construction | Solid Granite |
| Table Load Capacity | 1000kg |
| Max. Velocity Vector | 1020mm/sec² |
| Max. Acceleration Vector | 1020mm/sec² |
| Air Required | Yes |
| Air Consumption | 65 l/min (1.8 cfm) |
| Required Air Pressure | 5 bar (72 psi) |
| Aberlink Camera Support | Yes |
*Maximum Permissible Error MPEE within the thermal limits defined for optimum temperature range. **Installation environmental thermal limits: Rate of change <1°C/hr and <2°C/24hr. Temperature gradient <1°C/m
応用
High-performance, High-accuracy
The Horizon 1000 is a standout coordinate measuring machine with fast, smooth, and silent motion that is ideally suited to contact scanning. It also has a first-term accuracy specification of under two microns.
Unrivalled Reliability
Linear motors are non-contact and therefore have no wearing parts, thus provide the perfect solution for CMM drives, improving reliability and reducing maintenance.
- Linear motors offer frictionless, smooth, silent motion
- Thermal isolation of motors from metrology structure
- Smooth motion ideal for contact scanning
- Aberlink's revolutionary easy-to-use measurement software
- Shortest learning curve of any equivalent system - 1 day without prior CMM experience
- Choice of Y axis sizes ranging from 1200mm to 2000mm
- Suitable for the workshop environment
- Industrial joystick supplied as standard
- Free stylus change rack with every motorised probe head upgrade
仕様
| Axis Travel (mm) | X 1000 Y 1200, 2000 Z 800 |
| Overall Size (mm) | X 1603 Y 1830, 2630 Z 3070 |
| Motion | CNC |
| Structure | Bridge |
| Suitable for | Inspection Room |
| Drive Type | Linear |
| *Volumetric Accuracy | TP20 (1.9 + L/250)µm TP200 (1.8 + L/250)µm SP25M (1.75 + L/250)µm |
| Scale Resolution | 0.1µm |
| **Optimum Temp Range | 18 - 22°C |
| Operational Temp Range | 5 - 45°C |
| Table Construction | Solid Granite |
| Table Load Capacity | 1000kg |
| Max. Velocity Vector | 1020mm/sec² |
| Max. Acceleration Vector | 1020mm/sec² |
| Air Required | Yes |
| Air Consumption | 65 l/min (1.8 cfm) |
| Required Air Pressure | 5 bar (72 psi) |
| Aberlink Camera Support | Yes |
*Maximum Permissible Error MPEE within the thermal limits defined for optimum temperature range. **Installation environmental thermal limits: Rate of change <1°C/hr and <2°C/24hr. Temperature gradient <1°C/m
Catalogue