Bore Gauge Inch/Metric 4-6,5" / 0,00005"
Bore Gauge Inch/Metric 4-6,5" / 0,00005"
Model: 511-522
Brand: mitutoyo
Origin: Japan
Summary
A Mitutoyo ABSOLUTE Digimatic bore gauge designed exclusively for ID measurement. A minimum value holding function provides easy measurement of hole diameter. Up to three sets of master value and upper/lower tolerance values can be memorized and recalled at the push of a button. An analog bar indicator is integrated to enhance ease of reading, especially for GO/å±NG judgement. Measurements can be made inside very deep holes by using up to four extension rods.
- The Mitutoyo series 511 hole gauges are designed to accommodate a wide range of hole sizes and hole types.
- Display counters (2 types of analog clocks and electronic display clocks) can be purchased with a protective cover for the watch or not.
- Calibration rings are available to assist in the correct setting of the gauge readings prior to taking measurements.
- Range: 4 - 6.5 Inch
- Digital step: 0,001 mm
- Stroke of contact point: 1.2 mm
- Accuracy: 0,003 mm (excluding quantizing error)
- Accuracy: 0,003 mm (excluding quantizing error)
- Repeatability: 0,002 mm
- Display: LCD Character Height 7.5 mm
- Measuring force: ≤5 N
- Number of anvils: 13
- Sampling Frequency: 50 times/sec*
- Power supply: 2 batteries SR-44
- Battery life: 2000.0 hours
- ON/OFF: yes
- DATA (output with cable) / HOLD (display value): Yes
- PRESET 3x:Yes
- MIN Value Hold: Yes
- Digital/Analog: Digital
- Mass: 570 g
- Inch-Metric: Inch/Metric
-GO/±NG judgement: yes
Application
- The Mitutoyo series 511 hole gauges are designed to accommodate a wide range of hole sizes and hole types.
- Display counters (2 types of analog clocks and electronic display clocks) can be purchased with a protective cover for the watch or not.
- Calibration rings are available to assist in the correct setting of the gauge readings prior to taking measurements.
Specifications
- Range: 4 - 6.5 Inch
- Digital step: 0,001 mm
- Stroke of contact point: 1.2 mm
- Accuracy: 0,003 mm (excluding quantizing error)
- Accuracy: 0,003 mm (excluding quantizing error)
- Repeatability: 0,002 mm
- Display: LCD Character Height 7.5 mm
- Measuring force: ≤5 N
- Number of anvils: 13
- Sampling Frequency: 50 times/sec*
- Power supply: 2 batteries SR-44
- Battery life: 2000.0 hours
- ON/OFF: yes
- DATA (output with cable) / HOLD (display value): Yes
- PRESET 3x:Yes
- MIN Value Hold: Yes
- Digital/Analog: Digital
- Mass: 570 g
- Inch-Metric: Inch/Metric
-GO/±NG judgement: yes
Catalogue