DRUCK Digital Test Gauge

Model: DPI104

Brand: druck

Origin: UK

概要

Druck DPI 104 Intrinsically Safe Digital Test Pressure Gauge. 0.05 full scale accuracy. Range 0 to 1000 psig, 1/4 inch NPT male connection

0.05% full scale (FS) accuracy
Pressure ranges to 1,000 psi
Eleven selectable pressure units
Large, easy-to-read display with five-digit resolution
% pressure indication and additional bar graph for quick visual reference
Temperature compensated accuracy from 14°F to 122°F (-10°C to 50°C)
0 to 5V analog output
Pressure switch test
Minimum/maximum, tare and alarm functions
IDOS compatible and RS232 serial interface
Free of charge monitoring and control software
Stainless steel or Inconel pressure cavity for aggressive media

Accuracy
0.05% FS including non-linearity, hysteresis, repeatability and temperature effects from 14°F to 122°F (-10°C to 50°C)
Resolution
Maximum five digits
Burst Pressure
Burst pressure is 2x working pressure (exception, 20,000 psi (1400 bar); burst pressure 29,000 psi (2000 bar).
Selectable Pressure Units
kPa, MPa, kg/cm2, psi, mbar, bar, inHg, inH2O, mH2O, mmH2O and mmHg
Display
- Pressure reading: 5 digits with 0.5 in (12.7 mm) character height
- Full scale indicator: 2.5 digits with 0.25 in (6.35 mm) character height
Pressure Bar Graph
In addition to the numeric pressure indication, the DPI 104 LCD display contains a circular twenty segment bar graph to provide the user with a quick visual estimation of pressure from 0 to 100% full scale output. The bar graph increments represent 5% of the user- selectable range.
Display Update
Two times per second
Minimum/Maximum Values
The minimum and maximum pressure values can be displayed on the DPI 104. This function can be enabled/disabled, and reset by the user.
Switch Test
The DPI 104 features a switch test function that will capture and display the open and closed values from an external pressure switch. Maximum switch impedance 200 Ω.
Voltage Output
The DPI 104 can be programmed to provide a 0 to 5 V output signal that can be configured as directly proportional to the pressure shown in the display or set to a fixed value. The voltage output mode provides 0.1% FS accuracy from 50 mV to 5 V.
Alarm Output
The alarm output consists of an open drain field effect transistor (maximum current 250 mA, maximum voltage 24 VDC).
Adjustable Mounting Positions
For added convenience, the DPI 104 housing will rotate 320° around the pressure fitting and the faceplate can be rotated in any orientation for optimum visibility.
Menu Lock
To guard against unauthorized menu access, the DPI 104 features a menu and tare lock function.
RS232 Interface
Serial communications are provided to allow transfer of data to a PC with the optional serial lead (IA4090-2-V0). Using this link, all menu commands and display data are available via an ASCII command set or the optional SiCal Pro Software.
Network Capability
Up to 99 DPI 104 instruments can be connected together in a daisy chain-configured network.
Universal Pressure Module (UPM) Capability
UPM modules can be connected to the DPI 104 to enhance the accuracy and extend the pressure range.

Druck DPI 104 General Specifications
Display	LCD
EMC	EN 61326-1
Electrical Safety	EN 61010-1
Pressure Safety	Pressure Equipment Directive - Class: Sound Engineering Practice (SEP).
Power supply	9V, IEC 6LR61, ANSI/NEDA 1604 battery, OR use an external 12-24 Vdc 50mA supply.
Operating temperature	-10 to 50°C (14 to 122°F).
Storage temperature	-20 to 70°C (-4 to 158°F).
Ingress Protection	IP65 *.
Operating Humidity	0 to 95% relative humidity (RH) non-condensing
Vibration	Def Stan 66-31, 8.4 cat III.
Operating altitude	2000 metres (6560 ft).
Pollution degree	2
Switch input	Maximum impedance: 200Ω (mechanical contact only).
Alarm output	Type: Open drain Field Effect Transistor (FET) Maximum (mA): 250 mA; Maximum (V): 24 Vdc.
Analog output	0.05 to 5 Vdc; Minimum load: 500 Ω; Accuracy: 0.1% FS at 20°C (68°F) - user mode only. Temperature coefficient: 0.007% FS / °C (0.0039% FS / °F).
Battery life	Up to one year for pressure measurements: Au (power save facility) - On; maximum/minimum, alarm, Vout, switch - all set to OFF.
RS232/Network capacity	For: IDOS UPM, external software, or up to 99 units in series (‘daisy chain’).
Materials	Case: Acrylonitrile Butadiene Styrene (ABS) **
Approved	CE Marked.
Size	Diameter = 95 mm (3.74 in); Depth = 55 mm (2.2 in) Typical length (with connector) ≈ 120 mm (4.7 in).
Weight	350g (12.5 oz).

応用

Accuracy
0.05% FS including non-linearity, hysteresis, repeatability and temperature effects from 14°F to 122°F (-10°C to 50°C)
Resolution
Maximum five digits
Burst Pressure
Burst pressure is 2x working pressure (exception, 20,000 psi (1400 bar); burst pressure 29,000 psi (2000 bar).
Selectable Pressure Units
kPa, MPa, kg/cm2, psi, mbar, bar, inHg, inH2O, mH2O, mmH2O and mmHg
Display
- Pressure reading: 5 digits with 0.5 in (12.7 mm) character height
- Full scale indicator: 2.5 digits with 0.25 in (6.35 mm) character height
Pressure Bar Graph
In addition to the numeric pressure indication, the DPI 104 LCD display contains a circular twenty segment bar graph to provide the user with a quick visual estimation of pressure from 0 to 100% full scale output. The bar graph increments represent 5% of the user- selectable range.
Display Update
Two times per second
Minimum/Maximum Values
The minimum and maximum pressure values can be displayed on the DPI 104. This function can be enabled/disabled, and reset by the user.
Switch Test
The DPI 104 features a switch test function that will capture and display the open and closed values from an external pressure switch. Maximum switch impedance 200 Ω.
Voltage Output
The DPI 104 can be programmed to provide a 0 to 5 V output signal that can be configured as directly proportional to the pressure shown in the display or set to a fixed value. The voltage output mode provides 0.1% FS accuracy from 50 mV to 5 V.
Alarm Output
The alarm output consists of an open drain field effect transistor (maximum current 250 mA, maximum voltage 24 VDC).
Adjustable Mounting Positions
For added convenience, the DPI 104 housing will rotate 320° around the pressure fitting and the faceplate can be rotated in any orientation for optimum visibility.
Menu Lock
To guard against unauthorized menu access, the DPI 104 features a menu and tare lock function.
RS232 Interface
Serial communications are provided to allow transfer of data to a PC with the optional serial lead (IA4090-2-V0). Using this link, all menu commands and display data are available via an ASCII command set or the optional SiCal Pro Software.
Network Capability
Up to 99 DPI 104 instruments can be connected together in a daisy chain-configured network.
Universal Pressure Module (UPM) Capability
UPM modules can be connected to the DPI 104 to enhance the accuracy and extend the pressure range.

仕様

Druck DPI 104 General Specifications
Display	LCD
EMC	EN 61326-1
Electrical Safety	EN 61010-1
Pressure Safety	Pressure Equipment Directive - Class: Sound Engineering Practice (SEP).
Power supply	9V, IEC 6LR61, ANSI/NEDA 1604 battery, OR use an external 12-24 Vdc 50mA supply.
Operating temperature	-10 to 50°C (14 to 122°F).
Storage temperature	-20 to 70°C (-4 to 158°F).
Ingress Protection	IP65 *.
Operating Humidity	0 to 95% relative humidity (RH) non-condensing
Vibration	Def Stan 66-31, 8.4 cat III.
Operating altitude	2000 metres (6560 ft).
Pollution degree	2
Switch input	Maximum impedance: 200Ω (mechanical contact only).
Alarm output	Type: Open drain Field Effect Transistor (FET) Maximum (mA): 250 mA; Maximum (V): 24 Vdc.
Analog output	0.05 to 5 Vdc; Minimum load: 500 Ω; Accuracy: 0.1% FS at 20°C (68°F) - user mode only. Temperature coefficient: 0.007% FS / °C (0.0039% FS / °F).
Battery life	Up to one year for pressure measurements: Au (power save facility) - On; maximum/minimum, alarm, Vout, switch - all set to OFF.
RS232/Network capacity	For: IDOS UPM, external software, or up to 99 units in series (‘daisy chain’).
Materials	Case: Acrylonitrile Butadiene Styrene (ABS) **
Approved	CE Marked.
Size	Diameter = 95 mm (3.74 in); Depth = 55 mm (2.2 in) Typical length (with connector) ≈ 120 mm (4.7 in).
Weight	350g (12.5 oz).

DRUCK Digital Test Gauge

応用

仕様

Catalogue

関連製品