DRUCK Pressure Indicator

Model: DPI705

Brand: druck

Origin: UK

概要

±1.69 psi to 20,000 psi pressure range
0.05% full scale accuracy
Integral calibration record
Leak test, tare, maximum/minimum and filter
Hazardous Area (IS) version available

The Druck DPI 705E Pressure Indicator combine tough and rugged design with accurate and reliable measurements. The DPI 705E Series is designed for single handed operation and provides many essential features required for routine maintenance and system troubleshooting.

The 705E features 48 pressure ranges from ±1.69 psi to 20,000 psi (±25 mbar to 1,400 bar / 2.5 KPa to 140 MPa). The leak test is used to determine if there is a leak in the system by recording the pressure change over of time. The leak test can also be used with the RTD sensor to record a temperature change over time. It is user defined as 1, 3 or minute test.

Two Models:
- DPI705E ===> Safe Area pressure indicator
- DPI705EIS ==> Hazardous Area pressure indicator
PRESSURE RANGES (both models):
- 0 to 10" WC through to 20,000 psi (0 to 25 mbar through to 1400 bar)
PRESSURE ACCURACY (calibration record included):
- Standard Accuracy => 0.1% full scale (FS)
- High Accuracy ====> 0.05% full scale (FS)
Optional remote plug and play pressure and Resistance Temperature Detector (RTD) sensors
Optional pneumatic and hydraulic hand pumps

Accuracy Options

SKU	Accuracy Level	Accuracy
1	Standard	±0.1%
2	High	±0.05%
3	Premium	±0.025%

Internal Pressure Sensor Options

Pressure Range	Abs	Gauge	Differential	Barometric	Standard Accuracy	High Accuracy	Precise Accuracy
25 mbar / 10 inH2O / 2.5 kPa	-	008G	008L	-	G, L	-	-
70 mbar / 1 psi / 7 kPa	-	01G	01L	-	G, L	-	-
200 mbar / 3 psi / 20 kPa	-	02G	02L	-	G, L	-	-
350 mbar / 5 psi / 35 kPa	03A	03G	03L	-	G, A, L	G, L	-
700 mbar / 10 psi / 70 kPa	04A	04G	04L	-	G, A, L	G, L	-
1 bar / 15 psi / 100 kPa	05A	05G	05L	-	G, A, L	G, A, L	-
75-115 kPa (Barometric)	-	-	-	05B	B	B	-
2 bar / 30 psi / 200 kPa	07A	07G	07L	-	G, A, L	G, A, L	G,L
3.5 bar / 50 psi / 350 kPa	08A	08G	-	-	G, A	G, A	G
7 bar / 100 psi / 700 kPa	10A	10G	-	-	G, A	G, A	G
10 bar / 150 psi / 1000 kPa	11A	11G	-	-	G, A	G, A	G, A
20 bar / 300 psi / 2 MPa	13A	13G	-	-	G, A	G, A	G, A
35 bar / 500 psi / 3.5 MPa	14A	14G	-	-	G, A	G, A	G, A
70 bar / 1000 psi / 7 MPa	16A	16G	-	-	G, A	G, A	G, A
100 bar / 1500 psi / 10 MPa	165A	165G	-	-	G, A	G, A	G, A
135 bar / 2000 psi / 13.5 MPa	17A	17G	-	-	G, A	G, A	G, A
200 bar / 3000 psi / 20 MPa	18A	18G	-	-	G, A	G, A	G, A
350 bar / 5000 psi / 35 MPa	20A	-	-	-	A	A	A
700 bar / 10000 psi / 70MPa	22A	-	-	-	A	A	A
Note	General	Do not apply pressure greater than 1 bar (16 psi) absolute to the negative port of differential pressure indicators.
	Pressure Connections	25 mbar – 200 bar (10 inH2O - 3000 psi / 2.5 kPa - 20 MPa): G1/8 BSP female
		Differential reference port: Legris 4 mm tubing adaptor
		≥350 bar (5000 psi / 35 MPa): Autoclave 9/16 x 18 UNF Male
Key	G = Gauge
	L = Differential
	A = Absolute
	B = Baro

Pressure Fitting Options

SKU	Pressure Fitting	Notes
P1	G1/8 BSP Female	For ranges less than 350 bar
P2	G1/4 BSP Female Adaptor	For ranges less than 350 bar
P3	1/8 NPT Female Adaptor	For ranges less than 350 bar
P4	1/4 NPT Female Adaptor	For ranges less than 350 bar
P5	Quick-Fit Adaptor	For ranges less than 350 bar
P6	9/16 x 18 UNF Male	Mandatory for ranges greater than/equal to 350 bar

Pressure Unit Options

SKU	Pressure Units
U0	All Pressure units (Default selection)
U1	Pa (Si) Pressure units only

Additional Options

SKU	Option
OP0	No option required
OP1	Negative calibration for gauge ranges less than 35 bar (If selected, the calibration certificate includes values down to -1 bar g.)

応用

Two Models:
- DPI705E ===> Safe Area pressure indicator
- DPI705EIS ==> Hazardous Area pressure indicator
PRESSURE RANGES (both models):
- 0 to 10" WC through to 20,000 psi (0 to 25 mbar through to 1400 bar)
PRESSURE ACCURACY (calibration record included):
- Standard Accuracy => 0.1% full scale (FS)
- High Accuracy ====> 0.05% full scale (FS)
Optional remote plug and play pressure and Resistance Temperature Detector (RTD) sensors
Optional pneumatic and hydraulic hand pumps

仕様

Accuracy Options

SKU	Accuracy Level	Accuracy
1	Standard	±0.1%
2	High	±0.05%
3	Premium	±0.025%

Internal Pressure Sensor Options

Pressure Range	Abs	Gauge	Differential	Barometric	Standard Accuracy	High Accuracy	Precise Accuracy
25 mbar / 10 inH2O / 2.5 kPa	-	008G	008L	-	G, L	-	-
70 mbar / 1 psi / 7 kPa	-	01G	01L	-	G, L	-	-
200 mbar / 3 psi / 20 kPa	-	02G	02L	-	G, L	-	-
350 mbar / 5 psi / 35 kPa	03A	03G	03L	-	G, A, L	G, L	-
700 mbar / 10 psi / 70 kPa	04A	04G	04L	-	G, A, L	G, L	-
1 bar / 15 psi / 100 kPa	05A	05G	05L	-	G, A, L	G, A, L	-
75-115 kPa (Barometric)	-	-	-	05B	B	B	-
2 bar / 30 psi / 200 kPa	07A	07G	07L	-	G, A, L	G, A, L	G,L
3.5 bar / 50 psi / 350 kPa	08A	08G	-	-	G, A	G, A	G
7 bar / 100 psi / 700 kPa	10A	10G	-	-	G, A	G, A	G
10 bar / 150 psi / 1000 kPa	11A	11G	-	-	G, A	G, A	G, A
20 bar / 300 psi / 2 MPa	13A	13G	-	-	G, A	G, A	G, A
35 bar / 500 psi / 3.5 MPa	14A	14G	-	-	G, A	G, A	G, A
70 bar / 1000 psi / 7 MPa	16A	16G	-	-	G, A	G, A	G, A
100 bar / 1500 psi / 10 MPa	165A	165G	-	-	G, A	G, A	G, A
135 bar / 2000 psi / 13.5 MPa	17A	17G	-	-	G, A	G, A	G, A
200 bar / 3000 psi / 20 MPa	18A	18G	-	-	G, A	G, A	G, A
350 bar / 5000 psi / 35 MPa	20A	-	-	-	A	A	A
700 bar / 10000 psi / 70MPa	22A	-	-	-	A	A	A
Note	General	Do not apply pressure greater than 1 bar (16 psi) absolute to the negative port of differential pressure indicators.
	Pressure Connections	25 mbar – 200 bar (10 inH2O - 3000 psi / 2.5 kPa - 20 MPa): G1/8 BSP female
		Differential reference port: Legris 4 mm tubing adaptor
		≥350 bar (5000 psi / 35 MPa): Autoclave 9/16 x 18 UNF Male
Key	G = Gauge
	L = Differential
	A = Absolute
	B = Baro

Pressure Fitting Options

SKU	Pressure Fitting	Notes
P1	G1/8 BSP Female	For ranges less than 350 bar
P2	G1/4 BSP Female Adaptor	For ranges less than 350 bar
P3	1/8 NPT Female Adaptor	For ranges less than 350 bar
P4	1/4 NPT Female Adaptor	For ranges less than 350 bar
P5	Quick-Fit Adaptor	For ranges less than 350 bar
P6	9/16 x 18 UNF Male	Mandatory for ranges greater than/equal to 350 bar

Pressure Unit Options

SKU	Pressure Units
U0	All Pressure units (Default selection)
U1	Pa (Si) Pressure units only

Additional Options

SKU	Option
OP0	No option required
OP1	Negative calibration for gauge ranges less than 35 bar (If selected, the calibration certificate includes values down to -1 bar g.)