DRUCK Air Data Test Sets
DRUCK Air Data Test Sets
Model: ADTS542F-ADTS552F
Brand: druck
Origin: UK/CHINA
Summary
Features
• ADTS Touch hand terminal with WiFi and Bluetooth® wireless technology (backup cable supplied)
• Swipe–action, touch screen user interface with colour graphics and menu
• Standard icons and layouts for routine testing
• Multiple languages
• High fl ow proportional pressure control technology
• Large capacity pressure/vacuum pump
• TERPS high accuracy pressure sensors inside
• Accuracy suitable for RVSM validation
• 15-month accuracy
• 18-month accuracy option
• Engine Pressure Ratio (EPR) option
• Low Airspeed option
• Stores customized aircraft test sequences
• Accessories bag supplied, ADTS Touch carry case option
• Available in a 2 channel, 3 channel or 4 channel confi guration
• A 2nd ADTS Touch hand terminal can be used as an indicator
• Retrospectively upgradable (ADTS552F upgradable to a three-channel or a 4-channel and ADTS553F upgradable to a 4-channel)
• GE ADTS global service support
ADTS Touch The ADTS Touch is a removable, robust wireless hand terminal that communicates to the test set via secure Bluetooth® wireless technology.
This technology and the innovative design of the ADTS Touch remove the need to run cables or hoses into the cockpit.
** A rechargeable battery pack enables up to eight hours of continuous ADTS Touch wireless use.
The battery can be charged by the ADTS Touch when connected to the test set, by power cable, or by an optional desk charger.
As an alternative, the ADTS Touch can be used as a conventional wired hand terminal, with or without a battery pack, by attaching a supplied cable, or as a local user interface by docking the hand terminal onto the ADTS550F.
A large, easy-to-read display in pressure or aeronautical units and swipe navigation, with intuitive icons that are logical and easy to remember, allow you to quickly scroll through available tasks.
The ability to set “aircraft safety limits,” enable “auto leak recovery” and save or recall aircraft test sequences make the ADTS Touch an easy-to-use hand terminal.
Its multi-language selection further enhances the ADTS Touch’s usability.
For the more demanding wireless application, such as a large aircraft outside of a hanger (nothing for the wireless signal to bounce off), the ADTS Touch-ER offers a solution.
The ADTS Touch-ER extends the wireless range, by the use of a fi xed external antenna, or by using the supplied window attach antenna.
Scaling Factors
• Altitude: ft, meters
• Airspeed: knots, km/hr, mph
• Rate of Climb: ft/min, m/min, m/s
• Others: mbar, inHg, inH2O, mmHg, kPa, hPa, psi Rate Control/Indication
• Roc: Rate of Climb
• Rt Ps: Rate of Static
• Rt Pt: Rate of Pitot
• Rt Qc: Rate of Pt-Ps
• Rt CAS: Rate of calibrated airspeed
• Rt EPR: Rate of engine pressure ratio Overpressure Negligible calibration change with up to 1.25 x full scale (FS) overload applied
Calibration Stability ADTS550F: Better than 0.05 mbar (Ps) and 0.05 mbar (Pt) over 15 months ADTS550F-E3: Better than 0.05 mbar (Ps) and 0.05 mbar (Pt) over 18 months
Recalibration Simple keypad instruction, use of primary standard pressure reference is recommended Display 7” WVGA (800X480) TFT, LED backlit display.
High contrast ratio, wide view angle, two readings-per-second update Power Supplies
Auto-selection between: 110/230 Vac, 50/60 Hz and 115 Vac, 400 Hz Power – 200 VA (ADTS552F) Power – 300 VA (ADTS553F/ADTS554F)
Power Failure Protection System locks and a manual let-down feature provided
Application
ADTS Touch The ADTS Touch is a removable, robust wireless hand terminal that communicates to the test set via secure Bluetooth® wireless technology.
This technology and the innovative design of the ADTS Touch remove the need to run cables or hoses into the cockpit.
** A rechargeable battery pack enables up to eight hours of continuous ADTS Touch wireless use.
The battery can be charged by the ADTS Touch when connected to the test set, by power cable, or by an optional desk charger.
As an alternative, the ADTS Touch can be used as a conventional wired hand terminal, with or without a battery pack, by attaching a supplied cable, or as a local user interface by docking the hand terminal onto the ADTS550F.
A large, easy-to-read display in pressure or aeronautical units and swipe navigation, with intuitive icons that are logical and easy to remember, allow you to quickly scroll through available tasks.
The ability to set “aircraft safety limits,” enable “auto leak recovery” and save or recall aircraft test sequences make the ADTS Touch an easy-to-use hand terminal.
Its multi-language selection further enhances the ADTS Touch’s usability.
For the more demanding wireless application, such as a large aircraft outside of a hanger (nothing for the wireless signal to bounce off), the ADTS Touch-ER offers a solution.
The ADTS Touch-ER extends the wireless range, by the use of a fi xed external antenna, or by using the supplied window attach antenna.
Specifications
Scaling Factors
• Altitude: ft, meters
• Airspeed: knots, km/hr, mph
• Rate of Climb: ft/min, m/min, m/s
• Others: mbar, inHg, inH2O, mmHg, kPa, hPa, psi Rate Control/Indication
• Roc: Rate of Climb
• Rt Ps: Rate of Static
• Rt Pt: Rate of Pitot
• Rt Qc: Rate of Pt-Ps
• Rt CAS: Rate of calibrated airspeed
• Rt EPR: Rate of engine pressure ratio Overpressure Negligible calibration change with up to 1.25 x full scale (FS) overload applied
Calibration Stability ADTS550F: Better than 0.05 mbar (Ps) and 0.05 mbar (Pt) over 15 months ADTS550F-E3: Better than 0.05 mbar (Ps) and 0.05 mbar (Pt) over 18 months
Recalibration Simple keypad instruction, use of primary standard pressure reference is recommended Display 7” WVGA (800X480) TFT, LED backlit display.
High contrast ratio, wide view angle, two readings-per-second update Power Supplies
Auto-selection between: 110/230 Vac, 50/60 Hz and 115 Vac, 400 Hz Power – 200 VA (ADTS552F) Power – 300 VA (ADTS553F/ADTS554F)
Power Failure Protection System locks and a manual let-down feature provided