DRUCK Submersible Pressure Transmitters
DRUCK Submersible Pressure Transmitters
Model: PTX1800
Brand: druck
Origin: UK/CHINA
Summary
1800 Series Druck High Performance Level Pressure Sensors
The PDCR 1800 transducer (mV output) and the PTX 1800 transmitter (4 to 20 mA output) are the latest generation of fully submersible titanium high performance sensors for measurement of hydrostatic liquid levels.
Features
• Ranges from 0.75 mH2O to 600 mH2O
• Accuracy ±0.10% full scale (FS) best straight line (BSL)
• Fully welded 17.5 mm diameter titanium construction
• Polyurethane and hydrocarbon resistant cables
• Full range of installation accessories
The 1800 Series incorporates many enhanced features gained from experience in supplying thousands of sensors for small and large scale installations worldwide.
Example applications include:
• Potable water From ground water borehole to surface water level measurements in rivers, canals and reservoirs.
• Waste water and remediation Monitoring of secondary and outfl ow sewage levels and contaminated ground water levels in land fi ll sites.
• Tank Level From land based liquid storage vessels to on-board ship ballast tank monitoring.
• Sea Water Marine environmental applications, including tide gauging, coastal fl ood protection and wave profi ling, amongst others
1800 Series Specifi cations
Intrinsic Safety (Option B) PDCR 1800:
ATEX Certifi ed (BAS02ATEX1250X) for use with IS barrier systems to EEx ia IIC T4 (-40°C ≤ Ta ≤ 80°C) for cable lengths up to 29 metres PTX 1800:
ATEX and IECEx Certifi ed (BAS01ATEX1018X and IECEx BAS10.0077X) for use with IS barrier systems to Ex ia I Ma (40°C ≤ Ta ≤ +80°C) and Ex ia IIC T4 Ga (-40°C ≤ Ta ≤ +80°C) for cable lengths up to 300 metres Lightning Surge Arrestor (PTX versions only):
Integral lightning protection assembly certifi ed to Standard IEC 61000-4-5 (Level 4) Physical Specifi cation Pressure Connection (Option C) Standard: Radial holed M14 x 1.5 mm male thread fi tted with protective acetyl nose cone Option C:
Screw on welded male pressure connection available (PTX 1800 only):
G1/4 Male fl at end G1/4B (fl at end) 6mm hole 1/4 NPT Male M12 x 1 Male 1/8-27 NPT Female M14 x 1.5 60° Int Cone Electrical Connection 1830:
Vented polyurethane cable with integral Kevlar® strain relief cord rated to 54 kg load. Water ingress protection IP68 to 700 mH2O 1840:
Vented Hytrel® 6108 cable (hydrocarbon resistant) with integral Kevlar® strain relief cord rated to 54 kg load. Water ingress protection IP68 to 700 mH2O Cable Lengths To be specifi ed as required in 1 metre increments up to 500 metres (for IS restrictions see Intrinsic Safety above).
For longer lengths refer to GE Measurement & Control.
Application
The 1800 Series incorporates many enhanced features gained from experience in supplying thousands of sensors for small and large scale installations worldwide.
Example applications include:
• Potable water From ground water borehole to surface water level measurements in rivers, canals and reservoirs.
• Waste water and remediation Monitoring of secondary and outfl ow sewage levels and contaminated ground water levels in land fi ll sites.
• Tank Level From land based liquid storage vessels to on-board ship ballast tank monitoring.
• Sea Water Marine environmental applications, including tide gauging, coastal fl ood protection and wave profi ling, amongst others
Specifications
1800 Series Specifi cations
Intrinsic Safety (Option B) PDCR 1800:
ATEX Certifi ed (BAS02ATEX1250X) for use with IS barrier systems to EEx ia IIC T4 (-40°C ≤ Ta ≤ 80°C) for cable lengths up to 29 metres PTX 1800:
ATEX and IECEx Certifi ed (BAS01ATEX1018X and IECEx BAS10.0077X) for use with IS barrier systems to Ex ia I Ma (40°C ≤ Ta ≤ +80°C) and Ex ia IIC T4 Ga (-40°C ≤ Ta ≤ +80°C) for cable lengths up to 300 metres Lightning Surge Arrestor (PTX versions only):
Integral lightning protection assembly certifi ed to Standard IEC 61000-4-5 (Level 4) Physical Specifi cation Pressure Connection (Option C) Standard: Radial holed M14 x 1.5 mm male thread fi tted with protective acetyl nose cone Option C:
Screw on welded male pressure connection available (PTX 1800 only):
G1/4 Male fl at end G1/4B (fl at end) 6mm hole 1/4 NPT Male M12 x 1 Male 1/8-27 NPT Female M14 x 1.5 60° Int Cone Electrical Connection 1830:
Vented polyurethane cable with integral Kevlar® strain relief cord rated to 54 kg load. Water ingress protection IP68 to 700 mH2O 1840:
Vented Hytrel® 6108 cable (hydrocarbon resistant) with integral Kevlar® strain relief cord rated to 54 kg load. Water ingress protection IP68 to 700 mH2O Cable Lengths To be specifi ed as required in 1 metre increments up to 500 metres (for IS restrictions see Intrinsic Safety above).
For longer lengths refer to GE Measurement & Control.